[cisco-voip] same DN s in different partiitons but how

[Lelio Fulgenzi]

my apologies, 7 or 10 digit dialing is a North American thing.

X digit dialing without the need for end of dialing signalling on PRIs should also follow...................
  ----- Original Message ----- 
  From: Lelio Fulgenzi 
  To: Vince Loschiavo ; gokhan senol ; cisco-voip at puck.nether.net 
  Sent: Sunday, December 10, 2006 10:37 PM
  Subject: Re: [cisco-voip] same DN s in different partiitons but how


  If you create translations in a partition that only your PRI's have access to then you should be OK.

  these translations would be full digit translations, so they would have as many as the numbers as the PSTN could send you and translate to an extension.

  I found that with translations that the PRI accesses, you don't have to worry about end of dialing, the ISDN signalling automatically has an end of dialing signal.

  so if you have 7 or 10 digit dialing mixed, it should be OK.

  for example, create a translation for 900442227774xxx that masks to xxx and you should be OK.

  of course, this translation should be in a partition that only your PRI has access too.

    ----- Original Message ----- 
    From: Vince Loschiavo 
    To: gokhan senol ; cisco-voip at puck.nether.net 
    Sent: Sunday, December 10, 2006 10:29 PM
    Subject: Re: [cisco-voip] same DN s in different partiitons but how


    I guess if they are in different partitions....then the PRI's that these DNs are coming in on should be in the same partitions.  Shouldn't be a big deal now that I think about it....





----------------------------------------------------------------------------
    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gokhan senol
    Sent: Sunday, December 10, 2006 3:54 AM
    To: cisco-voip at puck.nether.net
    Subject: [cisco-voip] same DN s in different partiitons but how


    hi,



    my customer wanna use same Direcotry numbers in different partitions

    for example.  when i dial 900442227774xxx    i must reach the person in england with DN 4xxx

    but when i dial   900122223334xxx  i must reach the person in usa with DN 4xxx

    also when i dial  900905556664xxx  i must reach the person in turkey with DN 4xxx



    so CCM 4.1.3 how can i do this. 

    thkns a lot



----------------------------------------------------------------------------
    Have a burning question? Go to Yahoo! Answers and get answers from real people who know. 


----------------------------------------------------------------------------


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061210/528ab3ec/attachment-0001.html