[cisco-voip] Swapping drive to another server and losing GC

[Wydra, Jason]

Not a dumb question. I probably should have explained what I'm doing. I
have one of my peers that's making configurations on the primary
CallManager in order to get it set up for IPCC. I need a configurable
Publisher to set up for training, thus the need to move a Pub drive to
my Subscriber. Then I'm going to put the drive back in the primary
server (Pub) after the training. Hope that makes sense.

 

Jason Wydra

 

 

 

From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Monday, December 11, 2006 8:16 PM
To: Wydra, Jason
Cc: cisco voip
Subject: Re: [cisco-voip] Swapping drive to another server and losing GC

 

Possibly a dumb question, but, if they are identical, why switch them
around?




Jonathan

On 12/11/06, Wydra, Jason < jason.wydra at berbee.com
<mailto:jason.wydra at berbee.com> > wrote:

Hey all - I have two identical MCS 7835 server platforms that shipped
together form Cisco. I made one of them a Pub and the other a Sub with
RAID 1. I need to make the Sub a Pub for a little while so I pulled a
drive form the Pub. When I put it in the Sub I was able to boot it up
and get phones registered. My only problem is that when I try to pull up
the Global Directory from CCM admin it times out and I got a "page
cannot be displayed". I can still login a user via ccmuser. I just can't
go into GC from CCMadmin to change any user attributes. Anyone know
what's going on? If I put the drive back into the Publisher I can access
GC with no problem.

 

Thanks,

 

Jason 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061211/0e0ea39c/attachment-0001.html