[cisco-voip] One DID >> several phones ring

[Voll, Scott]

Setup your HL to also include your VM Pilot and then you will need to
setup your CH for the 6196 extension.

 

Scott

 

________________________________

From: Tim Reimers [mailto:tim.reimers at asheville.k12.nc.us] 
Sent: Tuesday, December 12, 2006 12:57 PM
To: Voll, Scott
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] One DID >> several phones ring

 

Got it...

 

One other question..

 

I did this for our Maintenance department- --- They have 7912 phones
that don't support multiple numbers

but they DO want individual numbers on those phones..

hence the LG/HG/HP option..

 

Now, however, when I call 6196, and no one answers, it doesn't go to
their Call Handler to allow someone to select a particular users mailbox
to leave a message in (as it did in the past when 6196 appeared as 3rd
line on the two 7960 phones..)

 

How can I get  their CH working again?

 

6196 needs to 'fall through' the HG and end up going over to Unity for
processing just like any other DID that fails to be handled on a
phone...

 

 

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Tuesday, December 12, 2006 11:08 AM
To: Tim Reimers
Subject: RE: [cisco-voip] One DID >> several phones ring

Under Route plan there is your route/Hunt.

 

There are three things you need to configure

 

First the Line Group - setup all the extension you want to ring and set
the algorithm to Broadcast

 

Then setup the Hunt list to include the LG you just setup

 

Then setup the Hunt Pilot with the DID and the HL you just setup.

 

Test

 

Done

 

Scott

 

________________________________

From: Tim Reimers [mailto:tim.reimers at asheville.k12.nc.us] 
Sent: Monday, December 11, 2006 7:10 PM
To: Voll, Scott
Cc: Tim Reimers
Subject: RE: [cisco-voip] One DID >> several phones ring

 

so ... Hunt List with 6196 >> Hunt Group >> route plan >> Line
Group<extensions to call> ???

 

I'll look at this in the AM and ensure that I see all the steps needed..

 

thanks Scott!

 

Tim

 

________________________________

From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Mon 12/11/2006 4:46 PM
To: Tim Reimers; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] One DID >> several phones ring

Route plan --> Line Group

 

Make new one with the extensions and under distribution Algorithm -->
Broadcast

 

Then place in Hunt Group and then Hunt list with your 6196.

 

Hope that helps.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Reimers
Sent: Monday, December 11, 2006 1:35 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] One DID >> several phones ring

 

 

Hi -- 

silly question.. 

Can someone point me to Cisco's how-to on configuring one DID to ring
several phones 

Once upon a time, I knew how to do this in 3.x, but it's been a long
time. 

and... 

we now run 4.01  -- and I think things are different. 

I have tried reading whitepapers, etc -- and I think I have some
understanding... but not a 'steps to follow' 

As an example-- 

I want 6196 to ring simultaneously on 
6197 
6198 
2990 
2991 
2992 
2991 

whoever picks it up, gets the call. 

Next call rings the same phones again.. 

Thanks, and sorry for asking for simple directions, instead of having
the time to do all the reading and figuring myself...

Tim 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061212/da63ca9b/attachment-0001.html