[cisco-voip] keep Caller ID through Unity

[Voll, Scott]

Would that be set on each CH?  And I don't have direct to switch....
Mine is set to release to switch. And I'm still getting unity extension.

 

Scott

 

________________________________

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, December 13, 2006 8:42 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] keep Caller ID through Unity

 

are you using supervised transfer or direct to switch?

 

supervised transfer will send the unity port, but direct to switch
should send the caller id.

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."

	----- Original Message ----- 

	From: Voll, Scott <mailto:Scott.Voll at wesd.org>  

	To: cisco-voip at puck.nether.net 

	Sent: Wednesday, December 13, 2006 11:39 AM

	Subject: [cisco-voip] keep Caller ID through Unity

	 

	If I have a call go to VM on the Unity server and then transfer
to a CH (my Cell) is there a way to keep the original Caller ID rather
then the Unity extension?  CM 4.1 and Unity 4.0.5.

	 

	Thanks

	 

	Scott

	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061213/c535d5cb/attachment.html