[cisco-voip] MGCP Gatway configuration Commands on 2811

[Erick Bergquist]

The VLAN or IP subnet don't matter, but the router domain name must match the domain name configured in Call Manager for the gateway. Make sure you have good IP connectivity between the routers MGCP interface and Call Manager, and that the MGCP ports are not blocked by ACLs, firewalls, etc. 

On the gateway, do a 'show ccm' and the first line will show you what the MGCP Domain name. This must be the same as what is in CCM.  The MGCP domain name is a combination of the routers hostname and ip domain-name if configured.   I have seen many a people go change their router hostname or add a domain-name, and call about their external calls not working anymore. 

Erick

----- Original Message ----
From: Bassem Zayed <bzayed80 at yahoo.com>
To: cisco voip <cisco-voip at puck.nether.net>
Sent: Thursday, December 14, 2006 4:41:09 PM
Subject: [cisco-voip] MGCP Gatway configuration Commands on 2811

Dear all,
   
  We're trying to configure a C2811 as an MGCP gatway. The problem is i did the normal commands but still it wont register with CCM 4.1.3
  Regarding the CCM configuration i think i can manage but the configuration of the gatway is the problem.
   
  Also i quick question,should the gatway and the CCM be in the same Vlan for the GW to be able to reg with the CCM.
   
 


Everyone is raving about the all-new Yahoo! Mail beta._______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip







 
____________________________________________________________________________________
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061214/83a83607/attachment.html