[cisco-voip] MGCP Gatway configuration Commands on 2811

[Jonathan Charles]

And of course, we can't forget...

service MGCP




Jonathan

On 12/14/06, Chris Soechting <Chris at inxi.com> wrote:
>
>  Make sure your hostname match.  In CCM you have to use the router
> hostname, and if you have the command ip domain-name XXX, then the name in
> CCM must be hostname.domain-name.  Just do a show ccm-manager and copy the
> domain name from the output to callmanager.
>
>
>
> Regards,
>
>
>
> Chris Soechting, CCIE #15782 (Voice), CCSP
>
> Sr. Consulting Engineer
>
> *INX Inc - InterNetwork Experts*
>
> 7600 N. Capital of TX Highway
>
> Bldg B, Ste 120
>
> Austin, TX 78731
>
> IP Phone: 512.795.7107
>
> Fax: 512.795.8844
>
> Email: chris at inxi.com
>
> Web: www.inxi.com
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Bassem Zayed
> *Sent:* Thursday, December 14, 2006 4:41 PM
> *To:* cisco voip
> *Subject:* [cisco-voip] MGCP Gatway configuration Commands on 2811
>
>
>
> Dear all,
>
>
>
> We're trying to configure a C2811 as an MGCP gatway. The problem is i did
> the normal commands but still it wont register with CCM 4.1.3
>
> Regarding the CCM configuration i think i can manage but the configuration
> of the gatway is the problem.
>
>
>
> Also i quick question,should the gatway and the CCM be in the same Vlan
> for the GW to be able to reg with the CCM.
>
>
>
>
>  ------------------------------
>
> Everyone is raving about the all-new Yahoo! Mail beta.<http://us.rd.yahoo.com/evt=45083/*http:/advision.webevents.yahoo.com/mailbeta>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061214/92f6ba3b/attachment-0001.html