[cisco-voip] MGCP Gatway configuration Commands on 2811

[Chris Soechting]

Make sure your hostname match.  In CCM you have to use the router
hostname, and if you have the command ip domain-name XXX, then the name
in CCM must be hostname.domain-name.  Just do a show ccm-manager and
copy the domain name from the output to callmanager.

 

Regards,

 

Chris Soechting, CCIE #15782 (Voice), CCSP

Sr. Consulting Engineer

INX Inc - InterNetwork Experts

7600 N. Capital of TX Highway

Bldg B, Ste 120

Austin, TX 78731

IP Phone: 512.795.7107

Fax: 512.795.8844

Email: chris at inxi.com <mailto:chris at inxi.com> 

Web: www.inxi.com <http://www.inxi.com/> 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bassem Zayed
Sent: Thursday, December 14, 2006 4:41 PM
To: cisco voip
Subject: [cisco-voip] MGCP Gatway configuration Commands on 2811

 

Dear all,

 

We're trying to configure a C2811 as an MGCP gatway. The problem is i
did the normal commands but still it wont register with CCM 4.1.3

Regarding the CCM configuration i think i can manage but the
configuration of the gatway is the problem.

 

Also i quick question,should the gatway and the CCM be in the same Vlan
for the GW to be able to reg with the CCM.

 

  

________________________________

Everyone is raving about the all-new Yahoo! Mail beta.
<http://us.rd.yahoo.com/evt=45083/*http:/advision.webevents.yahoo.com/ma
ilbeta> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061214/ff1125f7/attachment.html