[cisco-voip] MGCP Gatway configuration Commands on 2811

[Jonathan Charles]

You are missing some ccm-manager commands...

Add:

ccm config

That should do it (you have specified where to get the config, but not to
actually download it).



Jonathan

On 12/15/06, new look <newlook110 at yahoo.com> wrote:
>
> Dear All,
> Thanks alto for your response but we still have a problem please find the
> router config and the debug ccm-manager events output and if there is any
> comments please reply
>
> at the CCM I added a MGCP GW and put the Domain Name is S21HQ-R (can I do
> it the IP add 192.168.1.20)???
> Thanks
> Waleed
>
> ----- Original Message ----
> From: Jonathan Charles <jonvoip at gmail.com>
> To: Chris Soechting <Chris at inxi.com>
> Cc: cisco voip <cisco-voip at puck.nether.net>
> Sent: Friday, December 15, 2006 3:20:13 AM
> Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811
>
> And of course, we can't forget...
>
> service MGCP
>
>
>
>
> Jonathan
>
> On 12/14/06, Chris Soechting <Chris at inxi.com > wrote:
> >
> >  Make sure your hostname match.  In CCM you have to use the router
> > hostname, and if you have the command ip domain-name XXX, then the name in
> > CCM must be hostname.domain-name.  Just do a show ccm-manager and copy
> > the domain name from the output to callmanager.
> >
> >
> >
> > Regards,
> >
> >
> >
> > Chris Soechting, CCIE #15782 (Voice), CCSP
> >
> > Sr. Consulting Engineer
> >
> > *INX Inc - InterNetwork Experts*
> >
> > 7600 N. Capital of TX Highway
> >
> > Bldg B, Ste 120
> >
> > Austin , TX 78731
> >
> > IP Phone: 512.795.7107
> >
> > Fax: 512.795.8844
> >
> > Email: chris at inxi.com
> >
> > Web: www.inxi.com
> >
> >
> >  ------------------------------
> >
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]
> > *On Behalf Of *Bassem Zayed
> > *Sent:* Thursday, December 14, 2006 4:41 PM
> > *To:* cisco voip
> > *Subject:* [cisco-voip] MGCP Gatway configuration Commands on 2811
> >
> >
> >
> > Dear all,
> >
> >
> >
> > We're trying to configure a C2811 as an MGCP gatway. The problem is i
> > did the normal commands but still it wont register with CCM 4.1.3
> >
> > Regarding the CCM configuration i think i can manage but the
> > configuration of the gatway is the problem.
> >
> >
> >
> > Also i quick question,should the gatway and the CCM be in the same Vlan
> > for the GW to be able to reg with the CCM.
> >
> >
> >
> >
> >  ------------------------------
> >
> > Everyone is raving about the all-new Yahoo! Mail beta.<http://us.rd.yahoo.com/evt=45083/*http:/advision.webevents.yahoo.com/mailbeta>
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061215/368d15d0/attachment.html