[cisco-voip] MGCP Gatway configuration Commands on 2811
Jonathan Charles
jonvoip at gmail.com
Fri Dec 15 12:36:46 EST 2006
The router sends its host name as the domain name. If you have an ip
domain-name configured it sends this concatenated with the hostname (
hostname.domain.net).
The Router sends a registration request with its IP to download its config
file via tftp.
Jonathan
On 12/15/06, new look <newlook110 at yahoo.com> wrote:
>
> Thank you every thing is ok now
> by no mgcp and mgcp again
>
> but I want to know how can I defind the domain name by the name
> and how the call manager know the ip add of the router is 192.168.1.20 is
> the router it self intiate the session???
>
> thanks again
>
> ----- Original Message ----
> From: Jonathan Charles <jonvoip at gmail.com>
> To: new look <newlook110 at yahoo.com>
> Cc: ciscovoip <cisco-voip at puck.nether.net>
> Sent: Friday, December 15, 2006 6:36:51 PM
> Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811
>
> We are having some kind of communication issue between the router and CCM.
>
> The question is, what kind?
>
> At this point, my guess is that there is something wrong with MGCP, either
> at a code level or a CCM level.
>
> What is the CCM version? Is it 3.2 or something old?
>
> Do the following.
>
> Debug mgcp packet.
>
> no mgcp and then mgcp again.
>
> Send us the output...
>
>
>
> Jonathan
>
> On 12/15/06, new look <newlook110 at yahoo.com> wrote:
> >
> > yes ping ok
> > and there is no FW
> > Still no responce
> >
> >
> >
> > ----- Original Message ----
> > From: Jonathan Charles < jonvoip at gmail.com>
> > To: new look <newlook110 at yahoo.com>
> > Cc: ciscovoip <cisco-voip at puck.nether.net>
> > Sent: Friday, December 15, 2006 6:04:20 PM
> > Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811
> >
> > Got a question.
> >
> > If this is a PC as a CCM, are you running it under VMWare?
> >
> > Is the firewall (Windows) on?
> >
> >
> >
> > Jonathan
> >
> > On 12/15/06, Jonathan Charles <jonvoip at gmail.com > wrote:
> > >
> > > Okay... and the MGCP domain names match.
> > >
> > > I presume we have already done basic IP troubleshooting (ping and
> > > stuff) and there are no ACLs blocking tcp 2427 or 2428, or UDP 69 (tftp)?
> > >
> > >
> > >
> > > Jonathan
> > >
> > >
> > >
> > > On 12/15/06, new look <newlook110 at yahoo.com > wrote:
> > > >
> > > > Note that I use a PC as a Call manager but it working properly
> > > > when configuring the router as H.323
> > > >
> > > > And still nothing...
> > > > yes still nothing
> > > >
> > > >
> > > > What does a show ccm display?
> > > >
> > > > 21HQ-R#sh ccm-manager
> > > > MGCP Domain Name: S21HQ-R
> > > > Priority Status Host
> > > > ============================================================
> > > > Primary Down 192.168.1.20
> > > > First Backup None
> > > > Second Backup None
> > > > Current active Call Manager: None
> > > > Backhaul/Redundant link port: 2428
> > > > Failover Interval: 30 seconds
> > > > Keepalive Interval: 15 seconds
> > > > Last keepalive sent: 14:27:35 UTC Dec 15 2006 (elapsed
> > > > time: 00:16:17)
> > > > Last MGCP traffic time: 14:28:34 UTC Dec 15 2006 (elapsed
> > > > time: 00:15:18)
> > > > Last failover time: None
> > > > Last switchback time: None
> > > > Switchback mode: Graceful
> > > > MGCP Fallback mode: Not Selected
> > > > Last MGCP Fallback start time: None
> > > > Last MGCP Fallback end time: None
> > > > MGCP Download Tones: Disabled
> > > > Backhaul/Redundant link is down
> > > > Configuration Auto-Download Information
> > > > =======================================
> > > > Current version-id: {33A060F5-D592-46E3-9F99-E70B83AF5917}
> > > > Last config-downloaded:00:00:00
> > > > Current state: Waiting for commands
> > > > Configuration Download statistics:
> > > > Download Attempted : 1
> > > > Download Successful : 1
> > > > Download Failed : 0
> > > > Configuration Attempted : 1
> > > > Configuration Successful : 1
> > > > Configuration Failed(Parsing): 0
> > > > Configuration Failed(config) : 0
> > > > Last config download command: New Registration
> > > > FAX mode: cisco
> > > > Configuration Error History:
> > > >
> > > >
> > > >
> > > > Do you have the right modules configured in CCM.
> > > > yes
> > > > What version of code?
> > > >
> > > > do you mean the IOS Ver
> > > >
> > > > S21HQ-R#sh ver
> > > > Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M),
> > > > Version 12.4(11)T, RELEASE SOFTWARE (fc2)
> > > > Technical Support: http://www.cisco.com/techsupport
> > > > Copyright (c) 1986-2006 by Cisco Systems, Inc.
> > > > Compiled Sat 18-Nov-06 17:16 by prod_rel_team
> > > > ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
> > > > S21HQ-R uptime is 18 minutes
> > > > System returned to ROM by reload at 14:25:53 UTC Fri Dec 15 2006
> > > > System image file is "flash:c2800nm-adventerprisek9-mz.124-11.T.bin"
> > > >
> > > > This product contains cryptographic features and is subject to
> > > > United
> > > > States and local country laws governing import, export, transfer and
> > > >
> > > > use. Delivery of Cisco cryptographic products does not imply
> > > > third-party authority to import, export, distribute or use
> > > > encryption.
> > > > Importers, exporters, distributors and users are responsible for
> > > > compliance with U.S. and local country laws. By using this product
> > > > you
> > > > agree to comply with applicable laws and regulations. If you are
> > > > unable
> > > > to comply with U.S. and local laws, return this product immediately.
> > > > A summary of U.S. laws governing Cisco cryptographic products may be
> > > > found at:
> > > > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> > > > If you require further assistance please contact us by sending email
> > > > to
> > > > export at cisco.com.
> > > > Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
> > > > Processor board ID FTX0946A4QM
> > > > 2 FastEthernet interfaces
> > > > 2 Serial(sync/async) interfaces
> > > > 1 Virtual Private Network (VPN) Module
> > > > 12 Voice FXO interfaces
> > > > DRAM configuration is 64 bits wide with parity enabled.
> > > > 239K bytes of non-volatile configuration memory.
> > > > 62720K bytes of ATA CompactFlash (Read/Write)
> > > > Configuration register is 0x2102
> > > > S21HQ-R#
> > > > -------------
> > > >
> > > > Do you have any MSN or Yahoo massenger??
> > > >
> > > >
> > > >
> > > > Jonathan
> > > >
> > > > On 12/15/06, new look <newlook110 at yahoo.com > wrote:
> > > > >
> > > > > yes and these commands was added automatically the GWconfig is
> > > > > ahhathed
> > > > > !
> > > > > mgcp
> > > > > mgcp call-agent 192.168.1.20 2427 service-type mgcp version 0.1
> > > > > mgcp dtmf-relay voip codec all mode out-of-band
> > > > > mgcp rtp unreachable timeout 1000 action notify
> > > > > mgcp modem passthrough voip mode nse
> > > > > mgcp package-capability rtp-package
> > > > > no mgcp package-capability res-package
> > > > > mgcp package-capability sst-package
> > > > > no mgcp package-capability fxr-package
> > > > > mgcp package-capability pre-package
> > > > > no mgcp timer receive-rtcp
> > > > > mgcp sdp simple
> > > > > mgcp rtp payload-type g726r16 static
> > > > > !
> > > > > mgcp profile default
> > > > > !
> > > > >
> > > > > ----- Original Message ----
> > > > > From: Jonathan Charles < jonvoip at gmail.com>
> > > > > To: new look <newlook110 at yahoo.com>
> > > > > Cc: Erick Bergquist <erickbe at yahoo.com>; ciscovoip <cisco-voip at puck.nether.net
> > > > > >
> > > > > Sent: Friday, December 15, 2006 5:28:27 PM
> > > > > Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on
> > > > > 2811
> > > > >
> > > > > When you added the ccm config command, did it start loading an xml
> > > > > file on the router?
> > > > >
> > > > > Make sure the domain name is correct (show ccm, first line) and
> > > > > matches that configured on CCM, from your config, it should be:
> > > > >
> > > > > S21HQ-R
> > > > >
> > > > >
> > > > > Do the following:
> > > > >
> > > > > conf t
> > > > > no mgcp
> > > > > mgcp
> > > > >
> > > > >
> > > > >
> > > > > Jonathan
> > > > >
> > > > >
> > > > > On 12/15/06, new look < newlook110 at yahoo.com > wrote:
> > > > > >
> > > > > > still not working
> > > > > >
> > > > > >
> > > > > > *Dec 15 14:21:33.959: cmapp_mgr_process_ev_active_host_failed:
> > > > > > Active host 0 ( 192.168.1.20) failed
> > > > > > *Dec 15 14:21:33.959: cmapp_mgr_check_hostlist: Active host is 0
> > > > > > (192.168.1.20 )
> > > > > > *Dec 15 14:21: 33.959: cmapp_try_fallback(set_to_mode=ON)
> > > > > > *Dec 15 14:21:33.959: cmapp_shut_backhaul: backhaul link
> > > > > > shutdown is not configured
> > > > > > *Dec 15 14:21:33.959: cmapp_try_fallback: fallback is not
> > > > > > configured
> > > > > > *Dec 15 14:21:33.959: cmapp_host_fsm: Processing event
> > > > > > REGISTRATION_NEEDED for host 0 ( 192.168.1.20) in state
> > > > > > REGISTERING
> > > > > > *Dec 15 14:21:33.959: cmapp_mgcp_send_rsip: ip_addr=192.168.1.20
> > > > > > port=2427 if_type=-1, slot=0,subunit=0 rst_type=3
> > > > > > *Dec 15 14:21:33.959: cmapp_start_host_tmr: Host 0 (192.168.1.20),
> > > > > > tmr 0, duration 30000
> > > > > > *Dec 15 14:22:03.959 : cmapp_mgr_process_ev_active_host_failed:
> > > > > > Active host 0 ( 192.168.1.20) failed
> > > > > > *Dec 15 14:22:03.959: cmapp_mgr_check_hostlist: Active host is 0
> > > > > > ( 192.168.1.20 )
> > > > > > *Dec 15 14:22:03.959: cmapp_try_fallback(set_to_mode=ON)
> > > > > > *Dec 15 14:22:03.959: cmapp_shut_backhaul: backhaul link
> > > > > > shutdown is not configured
> > > > > > *Dec 15 14:22:03.959: cmapp_try_fallback: fallback is not
> > > > > > configured
> > > > > > *Dec 15 14:22:03.959: cmapp_host_fsm: Processing event
> > > > > > REGISTRATION_NEEDED for host 0 ( 192.168.1.20) in state
> > > > > > REGISTERING
> > > > > > *Dec 15 14:22:03.959: cmapp_mgcp_send_rsip: ip_addr=192.168.1.20
> > > > > > port=2427 if_type=-1, slot=0,subunit=0 rst_type=3
> > > > > > *Dec 15 14:22:03.959: cmapp_start_host_tmr: Host 0 (192.168.1.20),
> > > > > > tmr 0, duration 30000
> > > > > > S21
> > > > > >
> > > > > > ----- Original Message ----
> > > > > > From: Jonathan Charles < jonvoip at gmail.com>
> > > > > > To: new look <newlook110 at yahoo.com >
> > > > > > Cc: cisco voip < cisco-voip at puck.nether.net>; Chris Soechting <Chris at inxi.com
> > > > > > >
> > > > > > Sent: Friday, December 15, 2006 5:12:52 PM
> > > > > > Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on
> > > > > > 2811
> > > > > >
> > > > > > You are missing some ccm-manager commands...
> > > > > >
> > > > > > Add:
> > > > > >
> > > > > > ccm config
> > > > > >
> > > > > > That should do it (you have specified where to get the config,
> > > > > > but not to actually download it).
> > > > > >
> > > > > >
> > > > > >
> > > > > > Jonathan
> > > > > >
> > > > > > On 12/15/06, new look <newlook110 at yahoo.com > wrote:
> > > > > > >
> > > > > > > Dear All,
> > > > > > > Thanks alto for your response but we still have a problem
> > > > > > > please find the router config and the debug ccm-manager events output and if
> > > > > > > there is any comments please reply
> > > > > > >
> > > > > > > at the CCM I added a MGCP GW and put the Domain Name is
> > > > > > > S21HQ-R (can I do it the IP add 192.168.1.20)???
> > > > > > > Thanks
> > > > > > > Waleed
> > > > > > >
> > > > > > > ----- Original Message ----
> > > > > > > From: Jonathan Charles < jonvoip at gmail.com>
> > > > > > > To: Chris Soechting <Chris at inxi.com>
> > > > > > > Cc: cisco voip < cisco-voip at puck.nether.net>
> > > > > > > Sent: Friday, December 15, 2006 3:20:13 AM
> > > > > > > Subject: Re: [cisco-voip] MGCP Gatway configuration Commands
> > > > > > > on 2811
> > > > > > >
> > > > > > > And of course, we can't forget...
> > > > > > >
> > > > > > > service MGCP
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Jonathan
> > > > > > >
> > > > > > > On 12/14/06, Chris Soechting <Chris at inxi.com > wrote:
> > > > > > > >
> > > > > > > > Make sure your hostname match. In CCM you have to use the
> > > > > > > > router hostname, and if you have the command ip domain-name XXX, then the
> > > > > > > > name in CCM must be hostname.domain-name. Just do a show
> > > > > > > > ccm-manager and copy the domain name from the output to callmanager.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Chris Soechting, CCIE #15782 (Voice), CCSP
> > > > > > > >
> > > > > > > > Sr. Consulting Engineer
> > > > > > > >
> > > > > > > > *INX Inc - InterNetwork Experts*
> > > > > > > >
> > > > > > > > 7600 N. Capital of TX Highway
> > > > > > > >
> > > > > > > > Bldg B, Ste 120
> > > > > > > >
> > > > > > > > Austin , TX 78731
> > > > > > > >
> > > > > > > > IP Phone: 512.795.7107
> > > > > > > >
> > > > > > > > Fax: 512.795.8844
> > > > > > > >
> > > > > > > > Email: chris at inxi.com
> > > > > > > >
> > > > > > > > Web: www.inxi.com
> > > > > > > >
> > > > > > > >
> > > > > > > > ------------------------------
> > > > > > > >
> > > > > > > > *From:* cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net ]
> > > > > > > > *On Behalf Of *Bassem Zayed
> > > > > > > > *Sent:* Thursday, December 14, 2006 4:41 PM
> > > > > > > > *To:* cisco voip
> > > > > > > > *Subject:* [cisco-voip] MGCP Gatway configuration Commands
> > > > > > > > on 2811
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Dear all,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > We're trying to configure a C2811 as an MGCP gatway. The
> > > > > > > > problem is i did the normal commands but still it wont register with CCM
> > > > > > > > 4.1.3
> > > > > > > >
> > > > > > > > Regarding the CCM configuration i think i can manage but the
> > > > > > > > configuration of the gatway is the problem.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Also i quick question,should the gatway and the CCM be in
> > > > > > > > the same Vlan for the GW to be able to reg with the CCM.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > ------------------------------
> > > > > > > >
> > > > > > > > Everyone is raving about the all-new Yahoo! Mail beta.<http://us.rd.yahoo.com/evt=45083/*http:/advision.webevents.yahoo.com/mailbeta>
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > cisco-voip mailing list
> > > > > > > > cisco-voip at puck.nether.net
> > > > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > _______________________________________________
> > > > > > > cisco-voip mailing list
> > > > > > > cisco-voip at puck.nether.net
> > > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > > >
> > > > > > >
> > > > > > > __________________________________________________
> > > > > > > Do You Yahoo!?
> > > > > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > > > >
> > > > > > > http://mail.yahoo.com
> > > > > > >
> > > > > > >
> > > > > > _______________________________________________
> > > > > > cisco-voip mailing list
> > > > > > cisco-voip at puck.nether.net
> > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > >
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > > > http://mail.yahoo.com
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > > http://mail.yahoo.com
> > > > >
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > http://mail.yahoo.com
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > > http://mail.yahoo.com
> > > >
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061215/25ec3193/attachment-0001.html
More information about the cisco-voip
mailing list