[cisco-voip] MGCP Gatway configuration Commands on 2811

Fri Dec 15 12:20:30 EST 2006

Thank you every thing is ok now 
by no mgcp and mgcp again

but I want to know how can I defind the domain name by the name 
and how the call manager know the ip add of the router is 192.168.1.20 is the router it self intiate the session???

thanks again

----- Original Message ----
From: Jonathan Charles <jonvoip at gmail.com>
To: new look <newlook110 at yahoo.com>
Cc: ciscovoip <cisco-voip at puck.nether.net>
Sent: Friday, December 15, 2006 6:36:51 PM
Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811

We are having some kind of communication issue between the router and CCM.

The question is, what kind?

At this point, my guess is that there is something wrong with MGCP, either at a code level or a CCM level. 

What is the CCM version? Is it 3.2 or something old?

Do the following.

Debug mgcp packet.

no mgcp and then mgcp again.

Send us the output... 

Jonathan

On 12/15/06, new look <newlook110 at yahoo.com> wrote:
yes ping ok
and there is no FW
Still no responce

----- Original Message ----
From: Jonathan Charles < jonvoip at gmail.com>
To: new look <newlook110 at yahoo.com>

Cc: ciscovoip <cisco-voip at puck.nether.net>
Sent: Friday, December 15, 2006 6:04:20 PM
Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811 

Got a question.

If this is a PC as a CCM, are you running it under VMWare?

Is the firewall (Windows) on?

Jonathan

On 12/15/06, Jonathan Charles <jonvoip at gmail.com > wrote: 
Okay... and the MGCP domain names match.

I presume we have already done basic IP troubleshooting (ping and stuff) and there are no ACLs blocking tcp 2427 or 2428, or UDP 69 (tftp)? 

Jonathan

On 12/15/06, new look <newlook110 at yahoo.com > wrote: 
Note that I use a PC as a Call manager but it working properly when configuring the router as H.323

And still nothing...

 yes still nothing

What does a show ccm display?

21HQ-R#sh ccm-manager 
MGCP Domain Name: S21HQ-R
Priority        Status                   Host
============================================================ 
Primary         Down                     192.168.1.20
First Backup    None                     
Second Backup   None                     
Current active Call Manager:    None
Backhaul/Redundant link port:   2428
Failover Interval:              30 seconds
Keepalive Interval:             15 seconds 
Last keepalive sent:            14:27:35 UTC Dec 15 2006 (elapsed time: 00:16:17)
Last MGCP traffic time:         14:28:34 UTC Dec 15 2006 (elapsed time: 00:15:18)
Last failover time:             None
Last switchback time:           None 
Switchback mode:                Graceful
MGCP Fallback mode:             Not Selected
Last MGCP Fallback start time:  None
Last MGCP Fallback end time:    None
MGCP Download Tones:            Disabled 
Backhaul/Redundant link is down
Configuration Auto-Download Information
=======================================
Current version-id: {33A060F5-D592-46E3-9F99-E70B83AF5917} 
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
        Download Attempted             : 1
          Download Successful          : 1
          Download Failed              : 0 
        Configuration Attempted        : 1
          Configuration Successful     : 1
          Configuration Failed(Parsing): 0
          Configuration Failed(config) : 0
Last config download command: New Registration
FAX mode: cisco
Configuration Error History: 

Do you have the right modules configured in CCM.
yes

What version of code?

do you mean the IOS Ver

 S21HQ-R#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 17:16 by prod_rel_team 
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
S21HQ-R uptime is 18 minutes
System returned to ROM by reload at 14:25:53 UTC Fri Dec 15 2006
System image file is "flash:c2800nm-adventerprisek9-mz.124-11.T.bin "

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and 
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export at cisco.com.
Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
Processor board ID FTX0946A4QM
2 FastEthernet interfaces
2 Serial(sync/async) interfaces 
1 Virtual Private Network (VPN) Module
12 Voice FXO interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write) 
Configuration register is 0x2102
S21HQ-R#
-------------

Do you have any MSN or Yahoo massenger??

Jonathan

On 12/15/06, new look <newlook110 at yahoo.com > wrote: 
yes and these commands was added automatically the GWconfig is ahhathed 
!
mgcp
mgcp call-agent 192.168.1.20 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package 
no mgcp package-capability res-package 
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static 
!         
mgcp profile default
!         

----- Original Message ----
From: Jonathan Charles < jonvoip at gmail.com>
To: new look <newlook110 at yahoo.com>

Cc: Erick Bergquist <erickbe at yahoo.com>; ciscovoip < cisco-voip at puck.nether.net>
Sent: Friday, December 15, 2006 5:28:27 PM
Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811

When you added the ccm config command, did it start loading an xml file on the router? 

Make sure the domain name is correct (show ccm, first line) and matches that configured on CCM, from your config, it should be: 

S21HQ-R

Do the following:

conf t
no mgcp
mgcp

Jonathan

On 12/15/06, new look < newlook110 at yahoo.com > wrote: 
still not working

*Dec 15 14:21:33.959: cmapp_mgr_process_ev_active_host_failed: Active host 0 ( 192.168.1.20) failed
*Dec 15 14:21:33.959: cmapp_mgr_check_hostlist: Active host is 0 (192.168.1.20 )
*Dec 15 14:21: 33.959: cmapp_try_fallback(set_to_mode=ON)
*Dec 15 14:21:33.959: cmapp_shut_backhaul: backhaul link shutdown is not configured
*Dec 15 14:21:33.959: cmapp_try_fallback: fallback is not configured 
*Dec 15 14:21:33.959: cmapp_host_fsm: Processing event REGISTRATION_NEEDED for host 0 ( 192.168.1.20) in state REGISTERING
*Dec 15 14:21:33.959: cmapp_mgcp_send_rsip: ip_addr=192.168.1.20 port=2427 if_type=-1, slot=0,subunit=0 rst_type=3 
*Dec 15 14:21:33.959: cmapp_start_host_tmr: Host 0 ( 192.168.1.20), tmr 0, duration 30000
*Dec 15 14:22:03.959 : cmapp_mgr_process_ev_active_host_failed: Active host 0 ( 192.168.1.20) failed
*Dec 15 14:22:03.959: cmapp_mgr_check_hostlist: Active host is 0 ( 192.168.1.20 )
*Dec 15 14:22:03.959: cmapp_try_fallback(set_to_mode=ON)
*Dec 15 14:22:03.959: cmapp_shut_backhaul: backhaul link shutdown is not configured 
*Dec 15 14:22:03.959: cmapp_try_fallback: fallback is not configured
*Dec 15 14:22:03.959: cmapp_host_fsm: Processing event REGISTRATION_NEEDED for host 0 ( 192.168.1.20) in state REGISTERING
*Dec 15 14:22:03.959: cmapp_mgcp_send_rsip: ip_addr=192.168.1.20 port=2427 if_type=-1, slot=0,subunit=0 rst_type=3 
*Dec 15 14:22:03.959: cmapp_start_host_tmr: Host 0 ( 192.168.1.20), tmr 0, duration 30000
S21

----- Original Message ----
From: Jonathan Charles < jonvoip at gmail.com>

To: new look <newlook110 at yahoo.com >
Cc: cisco voip < cisco-voip at puck.nether.net>; Chris Soechting < Chris at inxi.com>
Sent: Friday, December 15, 2006 5:12:52 PM 
Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811

You are missing some ccm-manager commands...

Add:

ccm config 

That should do it (you have specified where to get the config, but not to actually download it). 

Jonathan

On 12/15/06, new look <newlook110 at yahoo.com > wrote: 
Dear All,
Thanks alto for your response but we still have a problem please find the router config and the debug ccm-manager events output and if there is any comments please reply 

at the CCM I added a MGCP GW and put the Domain Name is S21HQ-R (can I do it the IP add 192.168.1.20)???
Thanks
Waleed

----- Original Message ----
From: Jonathan Charles < jonvoip at gmail.com>
To: Chris Soechting <Chris at inxi.com>
Cc: cisco voip < cisco-voip at puck.nether.net>
Sent: Friday, December 15, 2006 3:20:13 AM
Subject: Re: [cisco-voip] MGCP Gatway configuration Commands on 2811

And of course, we can't forget...

service MGCP

Jonathan

On 12/14/06, Chris Soechting <Chris at inxi.com > wrote: 
Make sure your hostname match.  In CCM you have to use the router hostname, and if you have the command ip domain-name XXX, then the name in CCM must be hostname.domain-name.  Just do a show ccm-manager and copy the domain name from the output to callmanager.

Regards,

Chris Soechting, CCIE #15782 (Voice), CCSP
Sr. Consulting Engineer
INX Inc - InterNetwork Experts 
7600 N. Capital of TX Highway
Bldg B, Ste 120
Austin , TX 78731
IP Phone: 512.795.7107
Fax: 512.795.8844
Email: chris at inxi.com 
Web: www.inxi.com 

From: cisco-voip-bounces at puck.nether.net [mailto: cisco-voip-bounces at puck.nether.net ] On Behalf Of Bassem Zayed
Sent: Thursday, December 14, 2006 4:41 PM
To: cisco voip 
Subject: [cisco-voip] MGCP Gatway configuration Commands on 2811

Dear all,

We're trying to configure a C2811 as an MGCP gatway. The problem is i did the normal commands but still it wont register with CCM 4.1.3 
Regarding the CCM configuration i think i can manage but the configuration of the gatway is the problem.

Also i quick question,should the gatway and the CCM be in the same Vlan for the GW to be able to reg with the CCM.

Everyone is raving about the all-new Yahoo! Mail beta.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip

__________________________________________________
Do You Yahoo!? 
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061215/a1cc0934/attachment-0001.html 