[cisco-voip] using a 3640 with FXS/FXO ports

[Vince Loschiavo]

You need the voice feature set. 
snf you'll want a "T" release. 
12.4.9T should work ok. 

Regards,

Vince Loschiavo
Senior Cisco Engineer
DATACORP
7862821164

Sent via BlackBerry from T-Mobile    

-----Original Message-----
From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Date: Fri, 15 Dec 2006 16:28:00 
To:<cisco-voip at puck.nether.net>
Subject: [cisco-voip] using a 3640 with FXS/FXO ports

OK, I've got an old 3640 with FXS/FXO ports that I need to do some testing with. Any pointers on where to start? The IOS selection process makes me cringe. I basically want to be able to register this router with CallManager and then test faxing out the FXS ports. If I can do some fancy stuff with the FXO ports then that would be fun too. 
  
  
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip