[cisco-voip] using a 3640 with FXS/FXO ports

[Ted Nugent]

It really depends on what how much flash/dram you have
in it that guy, hook us up with a sho ver and we can
give you some advise. I'm using  one of my old 3640s
for my Home CME router. An FXO-M1 (for callerID), CME
and an ATA makes a nice little package for home use,
the ol lady digs the intercom so we don't need to yell
up and downstairs anymore. Kick it up a notch and get
a couple 7920s and an old 350 or 1220AP and welcome to
true geekdom.. :-)



--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> OK, I've got an old 3640 with FXS/FXO ports that I
> need to do some testing with. Any pointers on where
> to start? The IOS selection process makes me cringe.
> I basically want to be able to register this router
> with CallManager and then test faxing out the FXS
> ports. If I can do some fancy stuff with the FXO
> ports then that would be fun too.
> 
> 
>
--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> "I can eat fifty eggs." "Nobody can eat fifty
eggs.">
_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com