[cisco-voip] FXO Disconnect

[Jonathan Charles]

Do NOT change the signaling (this is so telco can talk to the port, if it is
an FXO, it is probably loop start, leave it that way).

Your problem is called, Far End Disconnect...

Check this out:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml




Jonathan

On 12/16/06, new look <newlook110 at yahoo.com> wrote:
>
> Dear All,
> Could you please tell me what I need to solve the FXO Disconnect Problem
>  (When I get a call from outside and the caller cancel the call during the
> ringing the IP phone remain ringing)
> Did I need get any Information from my Telco Company????
> Is changing Loop Start or Ground Start affect this problem???
>  <https://puck.nether.net/mailman/listinfo/cisco-voip>
>
>
>
> Thanks
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061216/35e21e2d/attachment.html