[cisco-voip] H323 and MGCP simultaneously on gateway?

[Craig M Staffin]

We have this working on all of our sites.  Due to the limited nature of 
MGCP we are useing H323 to control all of our connection to the PSTN and 
MGCP to control the FXS ports.

Craig





"Jonathan Charles" <jonvoip at gmail.com> 
Sent by: cisco-voip-bounces at puck.nether.net
12/15/2006 09:41 AM

To
"Wydra, Jason" <jason.wydra at berbee.com>
cc
cisco-voip at puck.nether.net
Subject
Re: [cisco-voip] H323 and MGCP simultaneously on gateway?






I have done it.

Configured both and set the H.323 as a second choice on the route list, 
and then killed MGCP, calls still worked fine.




Jonathan

On 12/15/06, Wydra, Jason <jason.wydra at berbee.com> wrote:
Can you? I guess the better question is if it's supported.
 
Jason Wydra
Berbee
Cisco Voice Engineer
8725 West Higgins Road, Suite 700
Chicago, Il . 60631
IP phone 773.867.6084
Cell 630-209-9792
Jason.Wydra at berbee.com 
www.berbee.com
 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061218/9a592288/attachment.html