[cisco-voip] H323 and MGCP simultaneously on gateway?

[Wydra, Jason]

Yeah, I'm talking about running FXS ports in MGCP mode and T1 ports in
H323 mode at the same time.

 

Jason Wydra

Berbee

Cisco Voice Engineer

8725 West Higgins Road, Suite 700

Chicago, Il. 60631

IP phone 773.867.6084

Cell 630-209-9792

Jason.Wydra at berbee.com

www.berbee.com

________________________________

From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Friday, December 15, 2006 9:42 AM
To: Wydra, Jason
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] H323 and MGCP simultaneously on gateway?

 

So, I guess that wouldn't be 'simultaneously...'



Jonathan

On 12/15/06, Jonathan Charles <jonvoip at gmail.com > wrote:

I have done it.

Configured both and set the H.323 as a second choice on the route list,
and then killed MGCP, calls still worked fine. 




Jonathan

On 12/15/06, Wydra, Jason <jason.wydra at berbee.com> wrote:

	

	Can you? I guess the better question is if it's supported.

	 

	Jason Wydra

	Berbee

	Cisco Voice Engineer

	8725 West Higgins Road, Suite 700

	Chicago, Il . 60631

	IP phone 773.867.6084

	Cell 630-209-9792

	Jason.Wydra at berbee.com 

	www.berbee.com

	 

	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net 
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061215/bcc7ca35/attachment-0001.html