[cisco-voip] Catalyst 6608 T1 module

[Fretz, EA Eric at IS]

You'd still have the failure mode where if you DHCP server chokes and the
6608 resets, you'd get no statically assigned DHCP address.  
 
You'd be better off hanging your TFTP server off of a pair of clustered
servers (or load balanced, at least) and not worry about handling the
failover in the 6608 card.
 
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matt Slaga (US)
Sent: Tuesday, January 31, 2006 4:19 PM
To: Philip Walenta; Mendoza, Anthony R; Cisco VoIP
Subject: RE: [cisco-voip] Catalyst 6608 T1 module


Use DHCP to push two TFTP servers, but use DHCP reservations to obtain your
"static" address.
 
 
  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Philip Walenta
Sent: Tuesday, January 31, 2006 5:14 PM
To: 'Mendoza, Anthony R'; 'Cisco VoIP'
Subject: RE: [cisco-voip] Catalyst 6608 T1 module


To my knowledge, the 6608 has never supported multiple TFTP servers.


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mendoza, Anthony R
Sent: Tuesday, January 31, 2006 4:03 PM
To: Cisco VoIP
Subject: [cisco-voip] Catalyst 6608 T1 module


All,
 
Is there a way to assign multiple TFTP servers in a config on a 6608 when
running CatOS and not using DHCP?  I find when I'm going a static IP
configuration that I can only assign a single TFTP server which doesn't give
me much failover in a situation where I lose a CCM and for some reason the
device resets (such as a power outage).  I'd be forced to go re-configure it
in order to receive it's configuration.  Any way around that hassle?
 
Thanks,
-Anthony



  _____  




Disclaimer:

This e-mail communication and any attachments may contain confidential
and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to
this message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060201/83f0ccd9/attachment.html