[cisco-voip] Catalyst 6608 T1 module

[Wes Sisk]

Or what about redundant DHCP servers?  each allocating 1/2 of the  
available subnet.

/Wes
On Feb 1, 2006, at 10:19 AM, Fretz, EA Eric @ IS wrote:

You'd still have the failure mode where if you DHCP server chokes and  
the 6608 resets, you'd get no statically assigned DHCP address.

You'd be better off hanging your TFTP server off of a pair of  
clustered servers (or load balanced, at least) and not worry about  
handling the failover in the 6608 card.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Matt Slaga (US)
Sent: Tuesday, January 31, 2006 4:19 PM
To: Philip Walenta; Mendoza, Anthony R; Cisco VoIP
Subject: RE: [cisco-voip] Catalyst 6608 T1 module

Use DHCP to push two TFTP servers, but use DHCP reservations to  
obtain your "static" address.


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Philip Walenta
Sent: Tuesday, January 31, 2006 5:14 PM
To: 'Mendoza, Anthony R'; 'Cisco VoIP'
Subject: RE: [cisco-voip] Catalyst 6608 T1 module

To my knowledge, the 6608 has never supported multiple TFTP servers.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Mendoza, Anthony R
Sent: Tuesday, January 31, 2006 4:03 PM
To: Cisco VoIP
Subject: [cisco-voip] Catalyst 6608 T1 module

All,

Is there a way to assign multiple TFTP servers in a config on a 6608  
when running CatOS and not using DHCP?  I find when I'm going a  
static IP configuration that I can only assign a single TFTP server  
which doesn't give me much failover in a situation where I lose a CCM  
and for some reason the device resets (such as a power outage).  I'd  
be forced to go re-configure it in order to receive it's  
configuration.  Any way around that hassle?

Thanks,
-Anthony


Disclaimer:

This e-mail communication and any attachments may contain confidential
and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to
this message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060201/e5ad7da4/attachment.html