[cisco-voip] Applying mgcp changes

[Ryan Ratliff]

'no mgcp' and then 'mgcp' on the router to reset the gateway.  This  
will drop active calls AFAIK.

-Ryan

On Feb 1, 2006, at 11:31 AM, Ruben Montes ((EU)) wrote:

Hi,

if I'm not using the ccm-manager config and ccm-manager config server  
commands, when I do a change in the CCM MGCP endpoint page and I  
reset the gateway, is this change applied in the gateway?

I want to change the call classification from 'Use system default' to  
'OnNet'. How could I now if changes have been correctly propagated?

Thanks in advance,

Regards,

Ruben

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip