[cisco-voip] Applying mgcp changes

[Wes Sisk]

No, changes will not be propagated.

Take a look in the CCM traces at the time you see an error similar to:
MGCPBhHandler 10.1.230.10 - ERROR - MGCPNotificationRequest for  
reset: TCP Mgt not supported by the GW.  Sending MGCP err back to  
reload device. GWTCPOpened=1, GWRegistered=1|<CLID::CM3-Cluster><NID:: 
11.1.235.50><CT::1,100,86,1.25><IP::><DEV::>

Basically indicating CM cannot send the change notification to the  
gateway.

'no mgcp' , 'mgcp'
will be required.

/Wes



On Feb 1, 2006, at 11:31 AM, Ruben Montes ((EU)) wrote:

Hi,

if I'm not using the ccm-manager config and ccm-manager config server  
commands, when I do a change in the CCM MGCP endpoint page and I  
reset the gateway, is this change applied in the gateway?

I want to change the call classification from 'Use system default' to  
'OnNet'. How could I now if changes have been correctly propagated?

Thanks in advance,

Regards,

Ruben

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip