[cisco-voip] Applying mgcp changes

[Leonard Lane]

Depends on what changes you are doing, but certain changes require IOS
changes on the router, and without the ccm-manager config and servers
setup this will not take place, and need to be done manually. 

The change that you are making does not require any IOS changes, so you
would be fine.  Just check your CDR records and see if they are being
categorized as OnNet.

 

 

 

Leonard Lane

Network Engineer

CCNA, CCDA, CCVP, CCIE #14680, Voice

 

email: leonard at isccorp.net <mailto:pat at isccorp.net> 

support: 866.622.6722

www.isccorp.net <http://www.isccorp.net/> 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruben Montes
(EU)
Sent: Wednesday, February 01, 2006 9:32 AM
Cc: cisco-voip at puck.nether.net
Subject: [cisco-voip] Applying mgcp changes

 

Hi,

if I'm not using the ccm-manager config and ccm-manager config server
commands, when I do a change in the CCM MGCP endpoint page and I reset
the gateway, is this change applied in the gateway?

I want to change the call classification from 'Use system default' to
'OnNet'. How could I now if changes have been correctly propagated?

Thanks in advance,

Regards,

Ruben

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060201/c23580f5/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3883 bytes
Desc: image002.gif
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060201/c23580f5/attachment-0001.gif