[cisco-voip] DID

[Voll, Scott]

Couple questions:

MGCP or H323?

If H323 where is your VoIP dial peers?

What version of CM are you running?

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Sherif Fahmy
Sent: Monday, February 06, 2006 11:27 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DID

Hey All,

i have an e1 that has both did/dod on it
the dod is working okay with us however the did we are having a
problem...

when we call the extenstion from an external number the phone rings but
when you pick up there is nothing and the calling phone is still trying
to
ring... the thing is the caller doesnt get a tone thats says its calling
the other party.. and also when the called party recieves the ringing
and
hangs up ... it starts ringing again ...
it is as if the caller can signal the called party but the called party
cannot tell the  the calling party that it recieved the phone call


we thought maybe there is a problem with a firewall on the customer
premsis where it blocks the call manager from sending a signal to say
the
call has arrived but we dont have a firewall that blocks that

the configuration is below


dial-peer voice 2 pots
 destination-pattern .T
 incoming called-number .T
 direct-inward-dial
 port 7/6:0




voice-port 7/6:0
 compand-type a-law


controller E1 7/6
 framing NO-CRC4
 ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-semi-compelled
 cas-custom 0
  country saudiarabia


Any Input at this point will be helpful
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip