[cisco-voip] CM 4.1.3sr1 to sr2

[Voll, Scott]

The problem is that I have multiple Jtapi users (each called different
things)  one for each application (Berbee, Traverse, IPCCx, etc).

I know the Traverse one for sure all of a sudden has Phones, CTI ports,
and route points associated that was not associated before.  Now I'm
going through and unassociating those phone, cti ports and RP.

Scott

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Tuesday, February 07, 2006 8:17 AM
To: Voll, Scott
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM 4.1.3sr1 to sr2

The user your application uses is configured on the application not  
in the CM.  How would a CM upgrade change your application config?

-Ryan

On Feb 7, 2006, at 11:02 AM, Voll, Scott wrote:

Has anyone had any problems with upgrading CM 4.1.3sr1 to sr2 that is  
integrated with AD.



It seems after the upgrade my JTAPI Users got messed up.  I don't  
know how, but it looks like they are all using the same Jtapi User  
for all the different application I have that use JTAPI which is  
causing application to fail.



Can someone confirm or deny?



Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip