[cisco-voip] CM 4.1.3sr1 to sr2

[Wes Sisk]

do you have a backup of your 4.1(3)sr1 laying around?  we can extract 
the dcd contents and verify.

Voll, Scott wrote:
> The problem is that I have multiple Jtapi users (each called different
> things)  one for each application (Berbee, Traverse, IPCCx, etc).
>
> I know the Traverse one for sure all of a sudden has Phones, CTI ports,
> and route points associated that was not associated before.  Now I'm
> going through and unassociating those phone, cti ports and RP.
>
> Scott
>
> -----Original Message-----
> From: Ryan Ratliff [mailto:rratliff at cisco.com] 
> Sent: Tuesday, February 07, 2006 8:17 AM
> To: Voll, Scott
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CM 4.1.3sr1 to sr2
>
> The user your application uses is configured on the application not  
> in the CM.  How would a CM upgrade change your application config?
>
> -Ryan
>
> On Feb 7, 2006, at 11:02 AM, Voll, Scott wrote:
>
> Has anyone had any problems with upgrading CM 4.1.3sr1 to sr2 that is  
> integrated with AD.
>
>
>
> It seems after the upgrade my JTAPI Users got messed up.  I don't  
> know how, but it looks like they are all using the same Jtapi User  
> for all the different application I have that use JTAPI which is  
> causing application to fail.
>
>
>
> Can someone confirm or deny?
>
>
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>