[cisco-voip] Caller ID

[Jonathan Charles]

BRI uses the same signaling as a PRI, so it works there

FXOs work... it will come in between the first and second ring (so if they
pickup before the 2nd ring, no CID).

A T1 CAS is another issue... while you can see digits in debugs, I have
never seen CID info... I would presume you can though.



Jonathan

On 2/13/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>  Can anyone tell me on what interfaces CM 4.1 can accept and display
> Caller ID.
>
>
>
> I know PRI's work.  What about FXO, CAS, BRI, etc.
>
>
>
> Thank
>
>
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060213/1bd8c5a1/attachment.html