[cisco-voip] Caller ID

[Philip Walenta]

T1 CAS supports ANI via feature group B or D.  I know it's one of those two.
Only supported on a limited set of devices.


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Monday, February 13, 2006 3:54 PM
To: Voll, Scott
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Caller ID


BRI uses the same signaling as a PRI, so it works there

FXOs work... it will come in between the first and second ring (so if they
pickup before the 2nd ring, no CID).

A T1 CAS is another issue... while you can see digits in debugs, I have
never seen CID info... I would presume you can though.



Jonathan


On 2/13/06, Voll, Scott <Scott.Voll at wesd.org> wrote: 

Can anyone tell me on what interfaces CM 4.1 can accept and display Caller
ID.

 

I know PRI's work.  What about FXO, CAS, BRI, etc.

 

Thank

 

Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip





-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060213/d1f5df5f/attachment.html