[cisco-voip] Caller ID

[Matt Slaga (US)]

Last I checked, the FXO-M1 worked for caller ID but only with H323.
Maybe that is fixed now.
 

 
________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Monday, February 13, 2006 4:54 PM
To: Voll, Scott
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Caller ID


BRI uses the same signaling as a PRI, so it works there

FXOs work... it will come in between the first and second ring (so if
they pickup before the 2nd ring, no CID).

A T1 CAS is another issue... while you can see digits in debugs, I have
never seen CID info... I would presume you can though.



Jonathan


On 2/13/06, Voll, Scott <Scott.Voll at wesd.org> wrote: 

	Can anyone tell me on what interfaces CM 4.1 can accept and
display Caller ID.

	 

	I know PRI's work.  What about FXO, CAS, BRI, etc.

	 

	Thank

	 

	Scott


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	
	





-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060213/8d754ac1/attachment-0001.html