[cisco-voip] Caller ID

[Voll, Scott]

So if I understand what your saying is that with FGB and MGCP it works
and with FGD and H323 I can make it work, Yes?

 

 

 

________________________________

From: Wes Sisk 

 

FeatureGroupB is vanilla wink start t1-cas.  CM supports FGB via MGCP

FeatureGroupD includes ANI, but CCM does not support FGD via MGCP.  have
to use h323 if  you want FGB.  DNIS just gets a special format which is
*ANI*DNIS* which fails to match your route patterns in CM.  I've seen
several attempts to use translation patterns to force matches, but none
successful.

 

/Wes

 

On Feb 13, 2006, at 6:43 PM, Philip Walenta wrote:

 

T1 CAS supports ANI via feature group B or D.  I know it's one of those
two.  Only supported on a limited set of devices.

	 

	
________________________________


	From: Jonathan Charles
	
	

	BRI uses the same signaling as a PRI, so it works there
	
	FXOs work... it will come in between the first and second ring
(so if they pickup before the 2nd ring, no CID).
	
	A T1 CAS is another issue... while you can see digits in debugs,
I have never seen CID info... I would presume you can though.
	
	
	
	Jonathan

	On 2/13/06, Voll, Scott  wrote: 

	Can anyone tell me on what interfaces CM 4.1 can accept and
display Caller ID.

	 I know PRI's work.  What about FXO, CAS, BRI, etc.

	 

	Thank

	 Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060215/328365aa/attachment.html