[cisco-voip] Cannot add 1 line with BAT

[Lelio Fulgenzi]

No, just kept up to 3AM in the morning sometimes for these little quirks and I wouldn't wish that upon anyone.



  ----- Original Message ----- 
  From: Anthony Kouloglou 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck-nether.net 
  Sent: Thursday, February 16, 2006 12:01 PM
  Subject: Re: [cisco-voip] Cannot add 1 line with BAT


  Lelio,
  are you somekind of GOD?!!!!!! :-) 
  It worked!! I would have never found this out without this forum...
  Thanks again ;-) 

  Anthony

  Lelio Fulgenzi wrote: 
    see that the file does not contain a blank line at the bottom. i think i ran into that. i had to open the file in notepad go to the bottom and backspace up.
      ----- Original Message ----- 
      From: Anthony Kouloglou 
      To: cisco-voip at puck-nether.net 
      Sent: Thursday, February 16, 2006 11:55 AM
      Subject: [cisco-voip] Cannot add 1 line with BAT




      Hi all,
      i am new in BAT, allthough i have been using CCM for the past 2 years.
       I want to add for test purposes 1 line to a phone which has a device profile with 2 lines. Only one of these is configured. What am i doing wrong? I keep getting 

"mac address may contain only 12 Characters, check record number 2"This is the csv file that the excel sheet has produced:

      000DBD38723E,1,211,TEST,TEST,220,220,220,220,220,220,TEST



--------------------------------------------------------------------------
      _______________________________________________
      cisco-voip mailing list
      cisco-voip at puck.nether.net
      https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/43f44830/attachment.html