[cisco-voip] Cannot add 1 line with BAT

[Anthony Kouloglou]

Lelio,
are you somekind of GOD?!!!!!! :-)
It worked!! I would have never found this out without this forum...
Thanks again ;-)

Anthony

Lelio Fulgenzi wrote:

> see that the file does not contain a blank line at the bottom. i think 
> i ran into that. i had to open the file in notepad go to the bottom 
> and backspace up.
>
>     ----- Original Message -----
>     *From:* Anthony Kouloglou <mailto:akoul at dataways.gr>
>     *To:* cisco-voip at puck-nether.net <mailto:cisco-voip at puck-nether.net>
>     *Sent:* Thursday, February 16, 2006 11:55 AM
>     *Subject:* [cisco-voip] Cannot add 1 line with BAT
>
>
>
>     Hi all,
>     i am new in BAT, allthough i have been using CCM for the past 2 years.
>      I want to add for test purposes 1 line to a phone which has a
>     device profile with 2 lines. Only one of these is configured. What
>     am i doing wrong? I keep getting
>
>"mac address may contain only 12 Characters, check record number 2"
>
>     This is the csv file that the excel sheet has produced:
>
>     000DBD38723E,1,211,TEST,TEST,220,220,220,220,220,220,TEST
>
>     ------------------------------------------------------------------------
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/028adbca/attachment.html