[cisco-voip] Cannot add 1 line with BAT

[Lelio Fulgenzi]

see that the file does not contain a blank line at the bottom. i think i ran into that. i had to open the file in notepad go to the bottom and backspace up.
  ----- Original Message ----- 
  From: Anthony Kouloglou 
  To: cisco-voip at puck-nether.net 
  Sent: Thursday, February 16, 2006 11:55 AM
  Subject: [cisco-voip] Cannot add 1 line with BAT




  Hi all,
  i am new in BAT, allthough i have been using CCM for the past 2 years.
   I want to add for test purposes 1 line to a phone which has a device profile with 2 lines. Only one of these is configured. What am i doing wrong? I keep getting 

"mac address may contain only 12 Characters, check record number 2"This is the csv file that the excel sheet has produced:

  000DBD38723E,1,211,TEST,TEST,220,220,220,220,220,220,TEST



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/41473f78/attachment-0001.html