[cisco-voip] h323 and outgoing subnet mask

[Ryan Ratliff]

To have the mask applied you need to have the "Use Calling Party's  
External Phone Number Mask" set on the route pattern/route group  
details AND have the mask configured on the calling line.  There is  
no difference between H.323 and MGCP as far as CM is concerned.

-Ryan

On Feb 16, 2006, at 1:30 PM, James Grace wrote:

I need to know how outgoing mask for caller id works for h323 gws.   
We have a few sites around the us and they all use one h323 gw for LD  
calls.  We tried to put outgoing mask on the line config and this do  
not work.  If we put the mask on the gw config its fine.   But this  
way caller id is screwed because you can only put one mask #.  Is  
there a limitation with this by configuring  h323 gws.  Mgcp works  
fine.  But the vendor needs it to be h323



James D. Grace

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip