[cisco-voip] basic digit manipulation

[Ciscozest]

I am wondering what digits are sent with following config:

dial-peer voi 1 pots
destination-pattern 9[1-4].......
prefix 565
!

I have two FXS and two FXO VIC in my vg200, but no PSTN line. Is there a way i can test the above setup? Ie: to simulate as if the FXO interface 'up' so that I can use debug voice command to see the digits sent out. Anyone can help? 

thanks
Robin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/2001579f/attachment.html