[cisco-voip] basic digit manipulation

[Jonathan Charles]

565 then not the 9 or the next matched digit, anything matched by the dots
will be sent...

So,

565.......

Would be sent.



Jonathan

On 2/16/06, Ciscozest <ciscozest at gmail.com> wrote:
>
> I am wondering what digits are sent with following config:
>
> dial-peer voi 1 pots
> destination-pattern 9[1-4].......
> prefix 565
> !
>
> I have two FXS and two FXO VIC in my vg200, but no PSTN line. Is there a
> way i can test the above setup? Ie: to simulate as if the FXO interface 'up'
> so that I can use debug voice command to see the digits sent out. Anyone
> can help?
>
> thanks
> Robin
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/df80f022/attachment.html