[cisco-voip] basic digit manipulation

[Ciscozest]

thanks for your reply.  Initialy I thought anything within the bracket is not excplitly matched and will be sent out.
Anyway how if I want to include that range digit [1-4] to PSTN? Is there a simpler way to do it rather than create a unique dial-peer for each of them?
  ----- Original Message ----- 
  From: Jonathan Charles 
  To: Ciscozest 
  Cc: cisco-voip at puck.nether.net 
  Sent: Friday, February 17, 2006 8:33 AM
  Subject: Re: [cisco-voip] basic digit manipulation


  565 then not the 9 or the next matched digit, anything matched by the dots will be sent...

  So, 

  565.......

  Would be sent.



  Jonathan


  On 2/16/06, Ciscozest <ciscozest at gmail.com> wrote:
    I am wondering what digits are sent with following config:

    dial-peer voi 1 pots
    destination-pattern 9[1-4].......
    prefix 565
    !

    I have two FXS and two FXO VIC in my vg200, but no PSTN line. Is there a way i can test the above setup? Ie: to simulate as if the FXO interface 'up' so that I can use debug voice command to see the digits sent out. Anyone can help? 

    thanks
    Robin

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip




-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060216/d46d7b7d/attachment.html