[cisco-voip] Trusting phone QoS markings on a 4006

[Jonathan Charles]

Running 7.6(5)...

It is running a WS-X4013 1000BaseSX Sup...



J

On 2/17/06, Matt Slaga (US) < Matt.Slaga at us.didata.com> wrote:
>
> What version of code and what kind of supervisor module?
>
>
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Friday, February 17, 2006 3:23 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Trusting phone QoS markings on a 4006
>
> I have a customer with a 4006, running CatOS, I tried adding the command:
>
> set port qos 4/1-48 trust-device ciscoipphone
>
> But it doesn't recognize the qos...
>
> What am I missing? The command worked fine (as expected) on the 6500s...
> and we are seeing no dscp/tos/cos markings for voice traffic from these
> devices.
>
>
>
>
> Jonathan
>
> ------------------------------
>
> * Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful. If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you. *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060217/673aaa72/attachment-0001.html