[cisco-voip] Trusting phone QoS markings on a 4006

[Jonathan Charles]

Also, MLS is not enabled...



On 2/17/06, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> Running 7.6(5)...
>
> It is running a WS-X4013 1000BaseSX Sup...
>
>
>
> J
>
> On 2/17/06, Matt Slaga (US) < Matt.Slaga at us.didata.com> wrote:
> >
> > What version of code and what kind of supervisor module?
> >
> >
> >
> >  ------------------------------
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:
> > cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> > *Sent:* Friday, February 17, 2006 3:23 PM
> > *To:* cisco-voip at puck.nether.net
> > *Subject:* [cisco-voip] Trusting phone QoS markings on a 4006
> >
> > I have a customer with a 4006, running CatOS, I tried adding the
> > command:
> >
> > set port qos 4/1-48 trust-device ciscoipphone
> >
> > But it doesn't recognize the qos...
> >
> > What am I missing? The command worked fine (as expected) on the 6500s...
> > and we are seeing no dscp/tos/cos markings for voice traffic from these
> > devices.
> >
> >
> >
> >
> > Jonathan
> >
> > ------------------------------
> >
> > * Disclaimer:
> >
> > This e-mail communication and any attachments may contain
> > confidential and privileged information and is for use by the
> > designated addressee(s) named above only. If you are not the
> > intended addressee, you are hereby notified that you have received
> > this communication in error and that any use or reproduction of
> > this email or its contents is strictly prohibited and may be
> > unlawful. If you have received this communication in error, please
> > notify us immediately by replying to this message and deleting it
> > from your computer. Thank you. *
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060217/cf1e5553/attachment.html