Antwort: Re: [cisco-voip] Remotely rebooting Phone without using Callmanager (in CM not connected, but can still ping/http)

[Hans-Peter Walter]

forgot to mention that: 
- I did a "fw monitor" (a kind of tcpdump) on 
a firewall, and there is absolutely no traffic (only my ping from CCM).
- I even changed the IP of the router to the same ip of the phone, 
just nothing happened. I changed the IP back to .1 (Gateway), and 
I can again ping and http the phone.
- tried some very large pings for about 60 minutes (remembered that there 
was 
a bug in Win95 wihich caused system to reboot) and justed hoped I could 
happen anything.

How many lives got this phone ;-)? This load is too stable for me, I'm 
going to downgrad  the phone 
when CM should ever be able to reach again;-)!





Kevin Thorngren <kthorngr at cisco.com> 
18.02.2006 01:46

An
Hans-Peter Walter <Hans-Peter.Walter at tds.de>
Kopie
cisco-voip at puck.nether.net
Thema
Re: [cisco-voip] Remotely rebooting Phone without using Callmanager (in CM 
not connected, but can still ping/http)






Not sure of any other ideas at this point.  Just curious if there is 
any Skinny traffic from the phone to CCM.  Use Network Monitor on the 
Primary CCM to see if the phone is attempting to create a TCP 
connection to the CCM server and if it is failing.

Kevin
On Feb 17, 2006, at 7:38 PM, Hans-Peter Walter wrote:

>
> hi,
> we have a problem with a SRST-config at a remote site, so I played 
> around and set a
> line of a phone to "Auto Answer with speakerphone" and could hear some 
> servers running in the background,
> and did some testing. The SRST still doesn't work properly, but thats 
> another story...
>
> Now the phone some how stucks. I can ping it, I can go to the phone 
> website http://<phone-ip>, but it
> is *NOT* registered in Callmanager and not on the SRST-Router.
> I denied access for that phone to the callmanager (hoped it would try 
> to reboot) ==> no success
> I rebooted the SRST-Router (default-gateway of the phone) ==> no 
> success
> I shut down and enabled the switch-port where the phone is connected 
> ==> no success
> I even rebooted the entire switch ;-) ==> no success
> After all these actions I can still ping / http to the phone...
>
> I wish I had PoE there, because I think I just would need unplug 
> power....
> soooo: Is there another way to reboot a phone *without* the 
> Callmanager,
> maybe something hidden like http://<phine-ip>/admin or something?
>
> thanks and a nice weekend...
> HP_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060217/081dd464/attachment-0001.html