[cisco-voip] Remotely rebooting Phone without using Callmanager (in CM not connected, but can still ping/http)

[Mike Armstrong]

Maybe I'm missing something, but PoE or not, the phone is getting power from 
something, so somebody at the remote site should be able to unplug whatever 
is supplying power.  Maid, security guard, whoever is there could be talked 
through it.  (Unless it's the only phone there?)

Mike Armstrong
UF/ IFAS CREC
Lake Alfred, FL

> Message: 4
> Date: Sat, 18 Feb 2006 01:38:00 +0100
> From: Hans-Peter Walter <Hans-Peter.Walter at tds.de>
> Subject: [cisco-voip] Remotely rebooting Phone without using
> Callmanager (in CM not connected, but can still ping/http)
> To: cisco-voip at puck.nether.net
> Message-ID:
> <OF2FA8A131.E19A4887-ONC1257119.00025DE0-C1257119.000301A1 at de.tds-global.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> hi,
> we have a problem with a SRST-config at a remote site, so I played around
> and set a
> line of a phone to "Auto Answer with speakerphone" and could hear some
> servers running in the background,
> and did some testing. The SRST still doesn't work properly, but thats
> another story...
>
> Now the phone some how stucks. I can ping it, I can go to the phone
> website http://<phone-ip>, but it
> is *NOT* registered in Callmanager and not on the SRST-Router.
> I denied access for that phone to the callmanager (hoped it would try to
> reboot) ==> no success
> I rebooted the SRST-Router (default-gateway of the phone) ==> no success
> I shut down and enabled the switch-port where the phone is connected ==>
> no success
> I even rebooted the entire switch ;-) ==> no success
> After all these actions I can still ping / http to the phone...
>
> I wish I had PoE there, because I think I just would need unplug power....
> soooo: Is there another way to reboot a phone *without* the Callmanager,
> maybe something hidden like http://<phine-ip>/admin or something?
>
> thanks and a nice weekend...
> HP