[cisco-voip] Unity MWI on CM 4.1

[Kevin Thorngren]

BTW, the change doesn't take affect unless you restart the CCM service 
or delete and re-add the numbers (I would recommend the latter :-).  
Notice the lack of a "Reset" button.

Kevin
On Feb 20, 2006, at 12:18 PM, Voll, Scott wrote:

> Kevin—
>  
> So humbling, here I am trying to set the ports to a new CSS when it is 
> as easy as that.
>  
> You’re Awesome!!
>  
> Scott
>  
>
> From: Kevin Thorngren [mailto:kthorngr at cisco.com]
> Sent: Monday, February 20, 2006 9:12 AM
> To: Voll, Scott
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity MWI on CM 4.1
>  
> Not sure if your question was answered.....
>  
> Go to CCMAdmin > Feature > Voice Mail > Message Waiting. From here you 
> can select the CSS that the MWI on/off DNs use.
>  
> Kevin
> On Feb 20, 2006, at 11:35 AM, Voll, Scott wrote:
>>  
>> This is a newbee question, but since I really haven’t had to deal 
>> with it as the upgrade from 3.3 to 4.1 took care of it the question 
>> is:
>>  
>> Where do I set the CSS for the MWI ports?
>>  
>> I have to screw around with it now as I have made some CSS / 
>> Partitions not excisable to the orginal CSS that is used as the 
>> default CSS for all my phones.
>>  
>> Thanks
>>  
>> Scott
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 5701 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060220/feeac2a9/attachment.bin