[cisco-voip] SRST question

[Voll, Scott]

If I have 4 FXO ports on a 2801 running 12.3(14)T5 that goes into SRST
(MGCP VGW) which port will it start dialing out on then which is next
etc.

 

Reason I ask is this VGW is in to different Telco areas.  And the worst
part is that calls from one telco to the other are long distance.  So I
don't want to get into an issue of dialing a number in SRST and the
operator saying you don't have to dial 1 then try again for it to say
you must dial 1.  You get the basic idea.  I really don't want to try
and setup ~150 dial peers to fix the issue.  Is the easiest fix to just
remove any desination-patterns off the two ports that go to one telco?

 

Any thoughts?

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060220/52d9264a/attachment.html