[cisco-voip] Exchange Service Packs

[Erick Bergquist]

Below is the page you want. From my experience, you
will need the latest permissions wizard and run it and
may need to update unity with some ES's depending on
your setup perhaps. You may want to update unity to
4.1(1) first. 

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/cmptblty/msupdate.htm

Note, this in the above:

Caution Before you install Windows Server 2003 Service
Pack 1 on the Cisco Unity server(s) and on the partner
Exchange 2003 server, you may need to install a Cisco
Unity engineering special or run the latest version of
the Cisco Unity Permissions wizard. For more
information, refer to the tech note Windows 2003 SP 1
Causes Cisco Unity 4.0(4) and 4.0(5) to Lose
Communication with Exchange 2003 at 
http://www.cisco.com/warp/public/788/AVVID/unity-install-windows-server2003.html.


--- Adam Blomfield <adam.blomfield at gmail.com> wrote:

> I am currently running Cisco Unity 4.0 Build 4.0(3)
> SR 1 in unified
> messaging mode connected to an Exchange 2003
> infrastructure. The
> Exchange servers are currently running Windows 2003
> without any
> service packs and Exchange 2003 without any service
> packs. I would
> like to upgrade to Windows 2003 SP1 and Exchange
> 2003 SP2. Is this an
> acceptable thing to do with Unity? Are there any
> caveats or work
> arounds that I should be aware of? I tried searching
> on CCO, but
> couldn't find a definitive answer... however their
> search engine and I
> frequently don't get along!
> 
> Thanks,
> Adam
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com