[cisco-voip] FXO ports hanging issue

[Jonathan Charles]

Gee, have we had this problem?

Hmmm...

Well, we have a customer with a couple of sites, all on 2821s, and we have
been hitting the bug...

If you do a:

term mon

test voice port 0/1/1 codec-debug 100 0

You will see 4-character hex output if you are hitting the bug (normally,
you see 2-character hex output)...

And yes, the only fix is a reboot... Cisco says they are 'working on it,' so
we are not expecting a fix any time soon.


Jonathan

On 2/22/06, Ortiz, Carlos <CORTIZ at broward.org> wrote:
>
>  There is a known bug out there with FXO cards that seems to be affecting
> us (Waiting for another occurrence to verify with debugs for TAC).  The FXO
> cards on 2800/3800 serires routers can get hung up.  Inbound and outbound
> calls stop functioning and the only workaround at this time is a reboot.  I
> have about 5 locations with a 2800 series router and FXO cards.  I only see
> this problem in one location that happens to have the heaviest call volume.
> Just curious if anyone else has encountered this issue….
>
>
>
> Carlos
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060222/9def7db7/attachment.html