[cisco-voip] the best way to move config from 501 to 501

[Stu Packett]

James:
When I have to swap out PIX 501s, I usually just ask the user for their
password.  I'm using Active Directory as my RADIUS server for VPN
authentication, so I configure the VPNCLIENT lines on the PIX to be the
user's AD username and password.
 
By the way, copying and pasting from the old to the new PIX usually
works for me.  I don't think you will have any problems.
 
-Stu
 
Disclaimer:  If you have received this message in error, call (650)
988-8500 and delete or destroy any copy of this message.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, February 22, 2006 6:42 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] the best way to move config from 501 to 501 



I m setting up a remote site with 7971.  we configure a 501 here at
home, but can not swap with 501 at remote site (smartnet stuff)  I
understand that I could mess up the passwords on the pix501 if I don't
migrate the config correctly.  I was told this by a tac engineer,  but I
didn't understand exactly what passwords (telnet , cryto , logons etc)
can someone clear this up for me

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060223/9934bf55/attachment.html