[cisco-voip] Pinnacle #0 PB parity error

[Kevin Thorngren]

I am no cat6k expert.  I would recommend opening a TAC case to 
determine if this module has a hardware issue and to get it replaced it 
if does.

Kevin
On Feb 24, 2006, at 1:35 PM, Mike Mike wrote:

> Anyone know what this error means from a 6513 log:
>
> %PM_SCP-SP-6-LCP_FW_ERR_INFORM: Module 4 is experiencing the following 
> error: Pinnacle #0 PB parity error. TX path. Status=0x0002
>
> The module is a WS-X6148-RJ45V and was replaced.  The error is now 
> gone but not sure if a reboot wouldn't have cleared the error.
>
> Can't seem to find this on cisco.com.
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip