[cisco-voip] AAR and VG248 Phones

[Tim Medley]

I am attempting to setup AAR for a port on a VG248. I am using CCM 3.3 
(3)

When configuring AAR on a configured Vg248 port, I can set the AAR  
Group on the Line, but the AAR CSS field is not shown on the Device  
screen.

Under normal circumstances, the analog handset connected to the VG248  
port is restricted to internal calls (ie no long distance access), so  
I need to be able to set the AAR CSS to a CSS that will provide for  
LD access when AAR is invoked.

Is this a bug? Or a feature? I didn't find anything relevant on CCO.  
Has anyone run into this before?

tm

Tim Medley
medley at mac.com