[cisco-voip] moving a aim unity express

[Erick Bergquist]

It shouldn't be a problem. It's stored on a compact
flash card on the module. I would back it up first
just to be safe. Only thing you should need to
configure is the service-module interface on the
gateway it's moved into and maybe reconfigure
settings, routes, etc on CUE if networks, etc change.

See this link for procedures on how to remove the AIM
module, etc.

http://www.cisco.com/en/US/products/hw/modules/ps2641/prod_module_installation_guide09186a00801f347e.html

--- James Grace <jgrace at digitelusa.net> wrote:

> Can you move an aim from one gw to another without
> losing data 
> 
>  
> 
> James D. Grace 
> 
> CCNP CCNA MCSE MCDBA
> 
> Sr. System Engineer / Professional Svc.
> 
> Digitel Corporation
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com