[cisco-voip] Caller's display changed when dial through route point/route pattern

[Henry Lum]

Hi Justin,

I don't think I understand your solution. I am using a route pattern to
add a prefix to the dialled number and send it to a SIP trunk; there is
no need to change the calling party number. How can I use the Route List
to make the caller's display not showing the prefixes that I added?

Thanks
Henry

-----Original Message-----
From: Justin Steinberg [mailto:jsteinberg at gmail.com] 
Sent: Friday, February 24, 2006 3:50 PM
To: Henry Lum
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Caller's display changed when dial through
route point/route pattern

Henry,

If you modify the calling party number on the Route List instead of
the Route Pattern the IP phone will not update it's screen.

Justin

On 2/24/06, Henry Lum <Henry.Lum at newstep.com> wrote:
>
>
> I notice that when my 7960 IP phone dials through a route point or
route
> pattern on that modifies the called party number, the display on the
> caller's device will change accordingly. Is there a way to suppress
this
> change and keep the original dialled number on the caller's display?
>
>
>
> I am running CCM 4.1(2).
>
>
>
> Thanks
>
> Henry
>
>
>
> henry lum | product development | newstep networks | 416.979.5404 x230
|
> henry.lum at newstep.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>