[cisco-voip] gw 2811 with sw port module

[Voll, Scott]

Is there a switchport mode dynamic command rather then turnk?

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Thursday, January 05, 2006 11:26 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] gw 2811 with sw port module 

 

We have a gw with sw port module and we are putting ip phones it the
ports.  The port are config as 

Int fa 1/0 

Sw acc vlan 10 

Sw mod trunk 

Sw voice vla 20 

 

Now when like this the the pc connected to ip phone port has no ip
connectivity but the ip phone works fine 

If I remove the sw mod trunk   the pc work fine but they have to be
direct connected to switch module 

 

 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060105/31adf893/attachment.html