[cisco-voip] gw 2811 with sw port module

[Ryan Ratliff]

Also make sure you've added vlan 20 to the vlan-database.

-Ryan

On Jan 5, 2006, at 2:52 PM, Kevin Thorngren wrote:

Looks like you need to add the command:
switchport trunk encapsulation dot1q

Kevin
On Jan 5, 2006, at 2:25 PM, James Grace wrote:

> We have a gw with sw port module and we are putting ip phones it  
> the ports.  The port are config as
> Int fa 1/0
> Sw acc vlan 10
> Sw mod trunk
> Sw voice vla 20
>
> Now when like this the the pc connected to ip phone port has no ip  
> connectivity but the ip phone works fine
> If I remove the sw mod trunk   the pc work fine but they have to be  
> direct connected to switch module
>
>
>
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip