[cisco-voip] gw 2811 with sw port module

[Kevin Thorngren]

Looks like you need to add the command:
switchport trunk encapsulation dot1q

Kevin
On Jan 5, 2006, at 2:25 PM, James Grace wrote:

> We have a gw with sw port module and we are putting ip phones it the 
> ports.  The port are config as
> Int fa 1/0
> Sw acc vlan 10
> Sw mod trunk
> Sw voice vla 20
>  
> Now when like this the the pc connected to ip phone port has no ip 
> connectivity but the ip phone works fine
> If I remove the sw mod trunk   the pc work fine but they have to be 
> direct connected to switch module
>  
>  
>  
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2034 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060105/8774e57b/attachment.bin